Skip to content
Replacing a roof? Get a free quote by phone (678) 692-7348
Roofing Berkeley Lake logo

Itemized before it begins

Roof Replacement in Berkeley Lake, GA

Every square, every flashing piece and every possible decking repair priced in writing before the old roof comes off.

Large stone and siding home with layered shingle rooflines

What a Complete Replacement Quote Should Contain

Many roof replacement quotes arrive as a single figure, perhaps with a brand name and a color attached, and leave the homeowner to discover the details later, usually when an extra charge appears halfway through the job. Ours is built the other way around. We begin by measuring every slope to determine the number of squares, along with the linear footage of ridges, hips, valleys, eaves and rakes, since those measurements drive the quantities of starter, ridge cap, drip edge and leak barrier. We note every penetration, every wall intersection that will need step flashing, and the existing attic ventilation, then inspect the decking from above and from the attic. The written quote that follows lists the tear-off, the underlayment, the leak barrier at eaves, valleys and penetrations, new drip edge and flashing, ventilation corrections, the shingles themselves and a stated per-sheet price for any decking found to be rotten once the old roof is removed. As an Owens Corning Preferred Contractor, we install to that manufacturer's specifications in every detail the quote describes. When the work is finished, the property is cleaned, nail-swept and walked with you against the original document.

Line Items in Every Replacement Quote

Each of these appears as its own entry, so nothing is bundled out of sight.

  • Tear-off and disposal

    Removal of all existing layers to bare deck, with haul-away included.

  • Decking rate

    A per-sheet price for replacing any compromised wood, stated in advance.

  • Synthetic underlayment

    Measured to cover the full deck area.

  • Leak barrier

    Quantified for eaves, valleys and every penetration.

  • Edge metal and flashing

    Drip edge by linear foot, step flashing and pipe collars listed individually.

  • Ventilation

    Intake and exhaust corrections specified where the attic needs them.

  • Shingles, starter and ridge

    Squares of field shingles plus matching starter and ridge cap by length.

  • Cleanup

    Daily debris removal and a magnetic sweep at completion.

How a Replacement Proceeds

  1. Measure and inspect

    Slopes, edges, penetrations, ventilation and decking assessed and photographed.

  2. Itemized quote

    Every component, quantity and rate written out for your review.

  3. Selections and scheduling

    Shingle line and color chosen, permit pulled where required, date confirmed.

  4. Installation and review

    The roof installed as quoted, followed by cleanup and a walkthrough against the document.

Why Homeowners Replace Their Roofs With Us

  • A quote worth reading

    Detailed enough that you can compare it line by line with any other.

  • Preferred Contractor installation

    Our Owens Corning Preferred Contractor standing guides how each component goes on.

  • No mid-job surprises

    Decking and other variables priced before the tear-off begins.

  • Measured on site
  • Itemized quote
  • Decking rate in advance
  • Installed as written

Ready to See the Full Scope in Writing?

We will measure, inspect and prepare an itemized replacement quote that answers your questions before you have to ask them.